The Gaussian plume model is a (relatively) simple mathematical model that is typically applied to point source emitters, such as coal-burning electricity-producing plants. Occassionally, this model will be applied to non-point source emitters, such as exhaust from automobiles in an urban area. One of the key assumptions of this model is that over short periods of time (such as a few hours) steady state conditions exists with regard to air pollutant emissions and meteorological changes.
Air pollution is represented by an idealized plume coming from the top of a stack of some height and diameter. One of the primary calculations is the effective stack height. As the gases are heated in the plant (from the burning of coal or other materials), the hot plume will be thrust upward some distance above the top of the stack — the effective stack height. We need to be able to calculate this vertical displacement, which depends on the stack gas exit velocity and temperature, and the temperature of the surrounding air.Once the plume has reached its effective stack height, dispersion will begin in three dimensions. Dispersion in the downwind direction is a function of the mean wind speed blowing across the plume.
Dispersion in the cross-wind direction and in the vertical direction will be governed by the Gaussian plume equations of lateral dispersion. Lateral dispersion depends on a value known as the atmospheric condition, which is a measure of the relative stability of the surrounding air.The model assumes that dispersion in these two dimensions will take the form of a normal Gaussian curve, with the maximum concentration in the center of the plume. The “standard” algorithm used in plume studies is the Gaussian plume model, develped in 1932 by O.
G. Sutton. The algorithm is as follows: where: 1. C(x,y,z) is the concentration of the emission (in micrograms per cubic meter) at any point x meters downwind of the source, y meters laterally from the centerline of the plume, and z meters above ground level. 2.
Q is the quantity or mass of the emission (in grams) per unit of time (seconds) 3. u is the wind speed (in meters per second) 4. H is the height of the source above ground level (in meters) 5. and are the standard deviations of a statistically normal plume in the lateral and vertical dimensions, respectively This algorithm has been shown in a number of studies to be fairly predictive of emission dispersion in a variety of conditions. If you look at some of the examples on other Web links, you will find its application in roadside, urban, and long-term conditions.In this algorithm, we are concerned with dispersion in all three dimensions (x, y, and z): longitudinally (in the x direction) along a centerline of maximum concentration running downwind from the source laterally (in the y direction) on either side of the centerline, as the pollution spreads out sideways vertically (in the z direction) above and below a horizontal axis drawn through the source The other major calculations for a simple Gaussian plume model are as follows: 1.Effective Stack Height: 2. Lateral and Vertical Dispersion Coefficients: 3.
Ground-Level Concentrations: The stability categories were developed in the late 1970s, and are based on wind speed, insolation, and extent of cloud http://san. hufs. ac. kr/~gwlee/session9/gaussian. html[6/27/2013 11:58:54 AM] Session 9: Gaussian Plume Model cover.
As shown above, we can calculate the values the standard deviations from the downwind axis for these six conditions or categories using the algorithms above.Initially, Gaussian plume models were used for pollutants such as carbon monoxide and other non-reactive species. The model has serious limitations when trying to account for pollutants that undergo chemical transformation in the atmosphere.
Coupled with its dependence on steady state meteorological conditions and its short-term nature, this model has substantial limitations for use as a long-term airshed pollutant evaluator.